Home > POUCHES > Rifle Magazine Pouches >

Emdom 308 Double Magazine Pouch
Emdom 308 Double Magazine Pouch
 
Alternative Views:


Emdom USA

Share your opinion of this product.
Write a review now»

Price: $31.49
Approx. dimensions: Height adjustable x W: 3.5" x D: 3" (2 magazines)
Approx. weight: 2.7 oz.

* CUSTOM COLOR ORDERS are considered final sale. No returns or exchanges. Please check Availability tab below for stock status




Product Code: EU070A

Click to view another Colors

Colors*:


Qty:
DESCRIPTION
 
The Emdom 308 Double Magazine Pouch is designed to carry two standard capacity 20 round .308/7.62x51mm NATO magazines for most battle rifles like the FAL, M1A/M14, SR25, M110, etc. It will also hold two Magpul PMAG 20LR magazines. The height adjustable/detachable cover flap of the 308 Pouch will accommodate magazines with Magpul 7.62 NATO Magpuls.

Please visit the Emdom USA manufacturer section at www.militarymorons.com for additional details and photos (Note MultiCam product pictured is older version).

KEY FEATURES & DESIGN HIGHLIGHTS

Mounting:
MOLLE/PALS compatible via two included long MALICE clips. Also mountable on webbing or belts up to 2.75” wide via two short MALICE clips(sold separately). PALS/MOLLE mounting grid features 0.875” webbing for easier weaving of MALICE clips.

Versatility:
The 308 Double Magazine Pouch can be utilized as a conventional Velcro cover flap closure pouch, open top friction/tension fit pouch, or as an open top bungee retention shingle pouch by removing the cover flap and installing a length of shock cord with a folded piece of duct tape as a makeshift pull tab.

Passive retention:
External elastic band provides retention for up to two standard capacity 20 round .308/7.62x51mm NATO magazines for most battle rifles like the FAL, M1A/M14, SR25, M110, etc. It will also accommodate Magpul PMAG 20LR magazines.

Adjustable/detachable cover flap:
Can be adjusted for height to accommodate magazines with Magpul 7.62 NATO Magpuls while maintaining full hook and loop Velcro contact. Corners of the cover flap have been tapered to prevent snagging and allow quick and easy stowing when unobstructed access is needed (read below for details). A bartack strengthened pull tab allows fast and positive access to magazines with a single gloved hand. Cover flap can be removed completely if not needed.

Unobstructed access (see detailed photos below):
To keep the cover flap from interfering with access to magazines it can be folded inwards and tucked into interior cover flap retention strap behind the magazines. Exterior elastic retention band does not compromise pouch opening which allows for quick and smooth extraction and insertion of magazines. Low cut pouch body exposes an adequate amount of the magazine for a sure grip when extracting.

Feature packed design:
The foldable bottom of the 308 Pouch allows the pouch to be completely flattened when empty. To maximize available PALS real estate; there is no protruding binding tape around the edges of the pouch, thus preventing overlapping and/or deformity of pouches when mounted side by side. Drainage grommet at the very bottom of the pouch allows drainage of water, sand, and other unwanted debris.

Minimal bulk and weight:
Cover flap and mounting platform are each constructed of a single layer of material. PALS/MOLLE mounting grid composed of 0.875” wide webbing instead of the traditional 1" wide.

Color options:
Stocked in various standard colors. Also available in various custom colors. Please email us at [email protected] for any inquiries.

FEATURES
  • Approximate dimensions: Height adjustable x 3.5" wide x 3” deep
  • Approximate weight: 3 oz. (Including MALICE clips)
  • Two long MALICE clips included.
  • MOLLE/PALS compatible.
  • 0.875” wide webbing PALS/MOLLE mounting grid.
  • Mountable to webbing or belts up to 2.75” wide via two short MALICE clips (sold separately).
  • Designed to carry up to two standard capacity 20 round .308/7.62x51mm NATO FAL, M1A/M14, SR25, M110, etc. magazines.
  • Accommodates Magpul PMAG 20LR magazines.
  • Tapered cover flap end with pull tab.
  • Detachable cover flap is height adjustable to accommodate magazines with Magpul 7.62 NATO Magpuls.
  • Internal cover flap retention strap.
  • Passive external elastic retention.
  • Low cut pouch body for immediate and positive access to magazines.
  • Foldable bottom allows pouch to lay completely flat when empty.
  • Three possible configurations: Velcro cover flap closure, open top friction/tension fit, or open top with DIY shock cord retention.
  • Single layer cover flap and mounting platform.
  • No protruding binding tape around edges.
  • Drainage grommet for water, sand, etc.
  • Murdock jacquard woven MultiCam webbing.
  • Constructed from US Mil-Spec materials.
  • Back by Emdom USA lifetime warranty.
  • Available in various standard and custom colors.
  • Contact us at [email protected] for any inquiries.
  • See Emdom USA manufacturer section at www.militarymorons.com for additional details and photos (Note MultiCam product pictured is older version).

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 5 Write a review.

  1 of 1 people found the following review helpful:
 
4 of 5 308 double pouch September 23, 2023
Reviewer: Ryan Phillippe from Country Club, MO United States  
Excellent product, be great if they had a 308 satchel mag pouch

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent Product June 9, 2023
Reviewer: Joel B from Spokane, WA United States  
See above.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 Mag pouch fitment. November 21, 2022
Reviewer: William Voelz from Cleveland, TN United States  
The two double .308 mag pouches in multicam arrived. My 7.62x51  (.308) Magpul mags will not fit. One goes in only with both hands. Second one will not fit at all.  The length of the mags is not an issue because the Velcro flap is plenty long to cover even a 25 round mag.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 September 3, 2021
Reviewer: Daniel Malili from Fairfield, CA United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Quality Gear June 14, 2021
Reviewer: Anonymous Person from Fairfield, CA United States  
Works w/ 2 PMAGs, however 2 G3 mags will not fit.  G3 mags are much larger than AR-10/PMAGs. Regardless, a definite upgrade over USGI equipment.  Solid stitching all around. Secured w/ malice clips, these dont move around once attached to a plate carrier/vest. This is the best option you could find for 308 on the market.

Was this review helpful to you?